Tips for purifying drinking water

Tips for purifying drinking water

Usually, groundwater from different sources such as rivers or lakes tends to contain unhealthy germs known as pathogens. Water-borne infections that can spread quickly can cause when human or animal feces infected with these pathogens blend with drinking water. Some common types of pathogens include parasites, viruses, or bacteria, to name but a few. Let's find out more. Basically, water sterilization methods help kill or eliminate pathogens from the water you drink. It is not difficult to clean drinking water. You can perform a purge in several ways. For example, you can use ultraviolet rays, heat, filter, or a combination of these methods.

Normally, water suppliers ensure the safety of drinking water through various purification methods. You can also purge the drinking water to find an alternative source such as bottled water. This can be your only option if you cannot use or obtain water from your area's water supply unit or the water you get with e.Coli bacteria.

The best way to clean water

If you are looking for the most effective way to clean your drinking water, you can try the boiling method, especially if your water contains parasites such as a cryptoposporium or Guardia. All you have to do is boil water for at least 1 minute. Boiling time will be double if you are at an altitude of 2000 meters or more. After boiling, store the water in a food container and cover it.

Use of bleach generally

, it is good to use domestic chlorine bleach for this purpose because it can help eliminate most types of pathogens. However, you must keep away from the distiled bleach. Usually, bleach gives better results if it is mixed with lukewarm water. Only 2 drops of bleach can be more than enough for 4 cups of warm water.

Cover the bowl and wait for half an hour before you drink from it. You may experience a little chlorine smell after 30 minutes, which is fine. Also, if the water seems cloudy, you can add 2 more drops of bleach. If you don't like chlorine baits, you can keep the water container covered for a few hours. This will help to eliminate bait.

Water that is severely contaminated or contaminated

If water is heavily contaminated, adding bleach or boiling will not work. The reason is that these techniques cannot remove chemicals. In this case, you must go to a different source.

Cloudy or aquatic

Usually, water becomes dark or cloudy when it contains dust or sand. To reduce dimming, you can pour water through the coffee filter or a clean cloth. Allow the bits to sit at the bottom of the bowl, and then pour the clear water into another container before you eat it.

Iodine use

You can do this for a short period of time. However, there are some health concerns associated with iodine use over a long period of time. If you have children and pregnant women in your home, we do not suggest using iodine for this purpose. In short, these are some common ways you can use them to safely clean drinking water.